Setting up a Fixed Shift

 

A fixed shift has a defined start and end time. For example, a shift that starts at 7:30 AM and ends at 4:00 PM.

  1. Choose Setup in the navigation list.
  2. From the slide out menu, select Shifts.
  3. Choose + New.
  4. Enter an identifier for the shift at the Name field.
  5. Under Shift Type, select the type of fixed shift you wish to use; Shift with In and Out RevisionsClosedSelect this option if you want to use both the In and Out revision zones., Shift with No RevisionsClosedSelect this option if you do not want to use In and/or Out revisions zones. Punches will be rounded based on the rounding defined for the shift., Shift with In RevisionClosedSelect this option if you only want to use an In revision zone., or Shift with Out RevisionClosedSelect this option if you only want to use an Out revision zone..
  6. At the Arrive Early field, enter the earliest time when punches will revise forward to the In time or start of the shift. This field will not display, and will not be needed, if the Shift Type is set to Shift with No Revisions or Shift with Out Revision.
  7. At the In Time field, enter the time that the shift will begin.
  8. At the Out Time field, enter the time that the shift will end.
  9. At the Leave Late field, enter the latest time when punches will revise backward to the Out time or end of the shift. This field will not display, and will not be needed, if the Shift Type is set to Shift with No Revisions or Shift with In Revision.
  10. Select the break(s) you wish to assign to the shift. If you need to make a new shift press the + button.
  11. Configure any additional settings under the Advanced, Premium Time, and Overrides tab.
  12. Once complete, select Save.

 

Wed 12/05/2018